DigiTech RP1000 - MANUAL 2 - Section Six - Appendix; Specifications

50
Section Six - Appendix
General Specifications
A/D/A Converter: 24-bit high performance audio
Sampling Frequency: 44.1 kHz
DSP Section: AudioDNA2™ DSP Processor
Simultaneous Effects: 10
Preset Memory: 100 User Presets (1-00) / 100 Factory Presets (F1-F00)
Dimensions: 19.5˝ Length x 10.75˝ Width x 3.75˝ Height
Unit Weight: 11.5 lbs.
Analog Input Connections
Guitar Input:
Impedance: 1M Ohms
Maximum Input signal: 8 dBu
Stompbox Loop Input:
Impedance: 475K Ohms
Maximum Input signal: 8 dBu
Amp Loop Input
Impedance: 16K Ohms
Maximum Input signal: 8 dBu
Analog Output Connections
Line Outputs
Impedance: 1K Ohms unbalanced / 2K Ohms balanced
Maximum Output level: 8 dBu
XLR Mixer Outputs
Impedance: 2k Ohms balanced
Maximum Output Level: 14 dBu
Stompbox Loop Output
Impedance: 600 Ohms unbalanced / 1.2K Ohms balanced
Maximum Output signal: 8 dBu
Amp Loop Output
Impedance: 600 Ohms unbalanced / 1.2K Ohms balanced
Maximum Output signal: 8 dBu
Headphone Output
Minimum Headphone
Impedance: 50 Ohms
Voltage Rails: +/-15V
Electronic SNR: ≥ 107dB
USB: 2.0 compliant
Audio streaming: 2 channels to computer, 2 channels from computer
Sample rate: 44.1 kHz 24 bit
External Control Input
Looper Footswitch Input: for use with optional DigiTech FS3X
Power Requirements:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B-120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B -100
Europe: 230 VAC, 50 Hz Adapter: PS0913B -230
UK: 240 VAC, 50 Hz Adapter: PS0913B -240
Specifications