29
OCT Dn (octave down)
7TH Dn (a seventh below)
6tH Dn (a sixth below)
5tH Dn (a fifth below)
4tH Dn (a fourth below)
3RD Dn (a third below)
2ND Dn (a second below)
2ND UP (a second above)
3RD UP (a third above)
4TH UP (a fourth above)
5TH UP (a fifth above)
6TH UP (a sixth above)
7TH UP (a seventh above)
OCT UP (an octave above)
Key - Knob 4 selects the musical key that the HPS uses. Key choices range from the Key
of E (KEY E) through the Key of Eb (KEY E
).
Scale - Knob 5 selects the scale the HPS will use. Scale choices include: Major (MAJOR),
Minor (MINOR), Dorian (DORIAN), Mixolydian (MIXOLYdn), Lydian (LYDIAN), and Har-
monic Minor (HarmMINr).
Level - Knob 6 adjusts the HPS Level of all the pitch-altering effects in this module.
Ranges from 0 to 99.
Boss
®
OC-2 Octaver
TM
(octaver)
Based on the Boss
®
OC-2 Octaver
TM
, this adds two signals to your original guitar signal. The first
is one octave below your guitar, and the second is two octaves below your guitar. Each additional
signal has its own volume control.
Pre/Post Amp - Knob 2 determines where the effect appears in the effects chain. Turn
counter-clockwise for Pre (appears before the Distortion effect), or clockwise for Post
(appears after the Noise Gate effect).
Octave 1- Knob 3 adjusts the the volume of the signal 1 octave below the input signal.
Ranges from 0 to 99.
Octave 2 - Knob 4 controls the volume of the signal 2 octaves below the input signal.
Ranges 0 to 99.
Dry Level - Knob 6 controls the volume of the dry signal. Ranges from 0 to 99.
Delay
Delay is an effect that records a portion of the incoming signal, and then plays it back a short
time later. The recording can repeat just once or several times.
Delay - Knob 1 selects one of the 7 different Delay types. Values include: analog
(DigiTech
®
Analog Delay), dm delay (Based on the Boss DM-2 Analog Delay), digital
(DigiTech Digital Delay), modulate (DigiTech Modulated Delay), pingpong (DigiTech Pong
Delay), tape (DigiTech Tape Delay), echoplex (Based on the Maestro
TM
EP-2 Echoplex
®
Tape Echo), reverse (DigiTech Reverse Delay), lo fi (a Lo Fidelity Delay), and 2 tap (a
2-tap Delay). Press this knob to turn the Delays on and off.
Knobs 2-6 have the following functions for the various Delay Effects:
Delay Knob 2
(Time)
Knob 3
(Repeats)
Knob 4
(Param. 1)
Knob 5
(Param. 2)
Knob 6
(Delay
Level)
analog
Time Repeats -- Multiplier Delay Level
dm delay
Repeat Rate Echo Intensity Multiplier --
digital
Time Repeats Ducker
Threshold
Multiplier Delay Level
modulate
Time Repeats Depth Multiplier Delay Level
pingpong
Time Repeats Ducker
Threshold
Multiplier Delay Level
tape
Time Repeats Wow Multiplier Delay Level
To Next Page
Loading...
Need help?
General
