30
Delay Knob 2
(Time)
Knob 3
(Repeats)
Knob 4
(Param. 1)
Knob 5
(Param. 2)
Knob 6
(Delay
Level)
echoplex
Time Repeats -- Multiplier Volume
reverse
Time Repeats -- Multiplier Delay Mix
LO FI
Time Repeats -- Multiplier Volume
2 tap
Time Repeats Tap Ratio Multiplier Delay Mix
The Repeats parameter (Knob 3) ranges from 0 to Repeat Hold (Hold) for all delays except
the Echoplex
®
, DM-2, and Lo-Fi. Repeat Hold is one click past 99, and acts as an infinite repeat.
The Multiplier parameter (Knob 5) lets you divide the tap tempo rate into 1/2, 1/4, dotted 1/8,
1/8, and triplet 1/4 note rhythms.
Reverb
Using reverb in recorded program material gives the listener a sense that the material is being
performed in an actual room or hall. It is this similarity to actual acoustic spaces that makes
reverberation a useful tool in recorded music. The RP1000 features genuine Lexicon
®
reverbs,
whose rich, lush effects have been heard in countless songs, soundtracks, and live performances
for decades.
Reverb Types
Knob 1 selects the Reverb Effect or acoustic space. Press this knob to turn the Reverb
on and off. The following types are available:
To Next Page
Loading...
Need help?
General
