Dilo SF6 - Page 4

General safety notes
www.dilo-gmbh.com | 0100.bae
Specific safety notes and standard symbols
In the following operating manual specific safety warnings are given in order to draw your attention to
residual risks which cannot be avoided during the operation of the device.
These residual risks contain dangers for
 Persons
 Product and machine
 The environment
The symbols used in the operating manual should draw your attention specially to the
safety notes:
This symbol refers to risks for persons (danger to life, danger of injury)
This symbol refers to risks for machines, material and the environment.
This symbol refers to electric shock
The most important aim of the safety notes is to prevent personal injuries.
 If the warning sign „Danger“, appears, danger from machines, materials and the environment are
not excluded.
 If the warning sign „Warning“, appears, there is no danger for persons.
The corresponding symbol which is used cannot replace the text of the safety note.
Therefore the complete text must always be read.
This symbol is not for safety notes, but for information to understand the
device better.
Danger
Warning