Product description
www.dilo-gmbh.com | 0200.bae
Product description
Correct use
This service cart is designed for the recovery and putting into storage of SF
6
-gas from gas
compartments. Gas compartments can also be flooded with air, evacuated and filled with SF
6
-gas.
During each recovery and filling operation the SF
6
-gas passes through filters, which dry and purify the
gas.
Do not use the cart to exhaust or compress liquids or other gases.
Use of the SF
6
-gas service cart for any other purpose may not be safe.
The manufacturer will not accept any liability in case of injury and damage
caused by use of the cart for applications for which it was not intended.
We recommend that all persons who are involved in the operation and repair of DILO devices are
properly and specially trained.
Construction and operation of the service cart
The service cart consists of the following components:
Sheet metal frame evaporator (only for liquid storage)
Compressor storage tank or storage bottles (option)
Vacuum compressor or suction pump particle filter / dry filter
Vacuum pump electric control
Sheet metal frame:
The frame is of sheet metal construction.
It is designed with provisions for fork lift loading and unloading. The standard version is equipped with
fixing- and steerable rollers with brakes.
The wheels on versions with a storage tank or SF
6
-bottle storage are bolted to the frame. This type of
wheel is not provided on road trailer versions.
Danger
To Next Page
Loading...
