Dilo SF6 - General Safety Notes (Compressor)

Dry-running compressor | TM 5.0 B
www.dilo-gmbh.com | C 1610-10 | Page 7 / 18
General safety notes
 The compressor has been designed and constructed bearing in mind the standards to be
observed as well as additional technical specifications. Safe use of the machine can only be
achieved if all necessary measures are taken.
 The operator has to ensure that
 the device is only used for the purposes for which it is intended (see product description).
 the device is only operated in accordance with the instructions and in good condition and that
the safety devices are regularly checked.
 maintenance and repair personnel are issued with all the required safety and protective
clothing, which shall always be used.
 complete and legible operating manuals are available on site.
 only qualified personnel operates or repairs the device.
 this personnel is regularly instructed in safety procedures and environmental protection and
that this personnel is fully aware of the complete operating manuals and particularly in the
safety notes.
 the safety and warning notes mounted on the device are legible and not removed.
 all obligatory registrations and tests prescribed by law are carried out on the devices in
accordance with the local regulations (e. g. pressure vessel tests, test for electrical safety
etc.)
 the safety data sheet on SF
6
(can be obtained from the SF
6
supplier) is available for the
operating personnel. The instructions mentioned in the data sheet and safety precautions
must be known and observed by the operating personnel.