SNOWMOBILE TRANSPORTATION
For your comfort while transporting this snowmobile model is
designed as a demountable one. The snowmobile disassembly and
assembly procedure is described on page 8 of the manual. A
disassembled snowmobile may be easily placed in a boot and on a
rear seat of a passenger car.
In case of loading and transporting the snowmobile in an
assembled state keep to the following recommendations:
- don't drive under your own power on a trailer or car
vehicle float body;
- always safely secure the snowmobile on a trailer or car
vehicle float body;
- for avoiding damages or dirtying the snowmobile
while its transporting on an open trailer or car vehicle float body cover it with a protecting cover;
- in case of transporting the snowmobile with the help of a vehicle float body before starting a movement always check a tow bar and
preventers reliability.
SLINGING OF THE SNOWMOBILE
Lifting and transporting the snowmobile should be done with slings to a
track block frame and front suspension elements. Marked slinging points
should be also used for tying the snowmobile down when driving uphill.
27
To Next Page
Loading...
Need help?
General