HEADLIGHTS ADJUSTMENT
This snowmobile DINGO model is equipped with a regulated headlight lamp.
For regulation it is necessary: 1. To weaken a headlight takedown screw with a screwdriver (pic. 1);
2. To regulate the headlight in accordance with necessity (pic. 2 and 3);
3. After regulation secure the takedown screw weakened in point 1.
HEADLIGHT LAMP REPLACEMENT
For headlight lamp replacement motor block plastic together with a headlight (pic. 1) should be taken off and a clearance lamp should be drawn
out/replaced
2V3W (pic.2). According to pictures 3-4 draw out and replace the lamp H4 (12V35W). Perform the assembly in reverse sequence.
36
To Next Page
Loading...
Need help?
General