DFW series indicators DFW_03_12.07_EN_U
22
DFWLID/DFWLIDCC
1
Indicates the presence of power supply.
2
Sensor for the reception of the remote control signal.
3
Indicates that the weight detected by the weighing system is close to zero, within ±¼ of the division.
4
Indicates that the weight is unstable.
5
Indicates that the displayed value is a net weight.
6
Indicates the unit of measure in use and that one is in the first weighing range.
7
Indicates the unit of measure in use and that one is in the second weighing range.
8
Indicates that a specific function of the indicator is active.
ZERO
- Zeros the displayed gross weight, if it is within +/- 2% of the total capacity.
- Cancels the negative tare value
.
- When entering numbers it decreases the digit to be modified.
- It allows scrolling ahead inside the menu steps or in the parameters within a step.
TARE
- If pressed for an instant it carries out the semiautomatic tare.
- If pressed at length it allows entering the manual tare from keyboard.
- Cancels the negative tare value.
- In the numeric input phase it increases the digit to be modified.
- It allows scrolling backwards in the menu steps or in the parameters within a step.
To Next Page
Loading...
