DAG Series User Manual
6
Dinstar Technologies Co., Ltd.
1.4 Functions and Features
1.4.1 Protocol standard supported
● Standard SIP /MGCP protocol;
● Simple Traversal of UDP over NATs (STUN);
● IP Transport: RTP/RTCP
● Hypertext Transfer Protocol (HTTP);
● Dynamic Host Configuration Protocol (DHCP Server/Client);
● Domain Name System (DNS);
● ITU-T G.711A-Law/U-Law、G.723.1、G.729AB、G.168;
1.4.2 System function
● PLC,VAD,CNG
● DTMF mode: RFC 2833,SIP INFO and INBAND
● T.38/ Pass-Through FAX over IP
● HTTP/Telnet configuration
● Firmware upgrade by TFTP/Web
● QoS: Diffserve, TOS,802.1 P/Q VLAN tagging
● Caller ID, Call waiting, Call transfer, DND
1.4.3 Industrial standards supported
● Stationary use environment: EN 300 019: Class 3.1
● Storage environment: EN 300 019: Class 1.2
● Transportation environment: EN 300 019: Class 2.3
● Acoustic noise: EN 300 753
● CE EMC directive 2004/108/EC
● EN55022: 2006+A1:2007
● EN61000-3-2: 2006,
● EN61000-3-3: 1995+A1: 2001+A2: 2005
● EN55024: 1998+A1: 2001+A2: 2003
● Certifications: FCC, CE
1.4.4 General hardware specification
● Power supply: Output: 12VDC, Input 100~240 VAC/50HZ
● Temperature: 0~40℃(operational),-20~70℃(storage)
● Humidity: 10%~90%, no condensation
● Max power consumption: 6/8/10/15/30W
● Dimension(mm): DAG1000(1FXS):100*68*24, DAG1000(2FXS):160*110*30,
To Next Page
Loading...
