MAINTENANCE & AJUSTEMENTS
77
DANGER: Never lubricate or service the machine when the PTO is operating and/or the tractor engine is running.
WARNING: Never open guards/shields/doors or make adjustments while the machine or tractor engine is
running.
WARNING: Make sure all guards, shields and doors are in place and properly secured before starting the tractor
engine. When adjustments have been done, check the machine thoroughly for possible loose parts or bolts.
WARNING: Never park or work on a machine without first having blocked the wheels and applied the parking
brakes on the tractor.
WARNING: Never leave an operator in the tractor cab when performing a machine maintenance or inspection.
Also, for your own safety, instruct anyone standing in the immediate surroundings to keep a safe distance from
the harvester (e.g. a distance of at least 3 m or 10 ft).
WARNING: Ensure all moving parts have come to a complete stop before opening any guards, shields and doors
or servicing the harvester.
IMPORTANT: Lubrication and greasing at the proper frequency and quantity will minimize the wear and tear of the
components, thus reducing the possibilities of breakdowns.
HYDRAULIC CIRCUITS
The forage harvester is equipped with a hydraulic system to operate most of its functions. Make sure the hydraulic oil
level on the tractor is sufficient, that the oil is clean and of proper quality. Likewise, ensure the hydraulic couplers and
tractor valve couplers are thoroughly cleaned before connecting them.
POWER TAKE OFF (PTO)
To prevent the telescopic shafts on the PTO from blocking, grease as recommended.
DRIVE CHAINS
To maintain the roller chains, always use specifically formulated oil. Never apply grease on drive chains. Chains that have
accumulated dirt or debris should be clean with solvent and dipped in oil to avoid premature wear. As per manufacturer
specification, the chain life is limited to a 1.5% stretch from its theoretical length.
To Next Page
Loading...