SPECIFICATIONS
Specification and design are subject to change without notice and responsibility from the manufacturer.
DIMENSIONS
OVERALL width (narrow axle position)
With tires 31x13.50 - 15 TerraRib…….…………………………………….3.30 m (142”)
With tires 31x15.50 - 15 TerraGrip…..…………………………………….3.50 m (150”)
LENGTH (Spout in transport position) …................………...............................6.22 m (244”)
HEIGHT min / max – (Wheels in standard position)
Standard spout – lowered/lifted…………………….………………………2,79 m / 3.44 m (110”/140”)
‘Stinger’ spout – lowered/lifted……….…………………………………....2,79 m / 5.38 m (110”/212”)
WEIGHT
Standard equipment – tandem axle, Metal detector, short spout …………..2860 kg (6300 lb)
Processor rolls……….……….........................................................+300 kg (660 lb)
‘Stinger’ spout……….……….........................................................+110 kg (230 lb)
TRANSMISSIONS
ANGLE DRIVE CONFIGURATIONS
1000/800: 1000 rpm PTO - 815 rpm at the cutter head - 90 to 180 hp
1000/1000: 1000 rpm PTO - 1033 rpm at the cutter head - 160 to 300 hp
OIL CAPACITY
8 litres – Synthetic 80W140
MAIN GEARBOX FEATURES
Reverse, Neutral, Forward position (R-N-F)
Electro-hydraulic shifter
Torque limiter
2 length of cut ranges (LOC pulley - factory installed)
3 length of cut (cut sprockets)
OIL CAPACITY
4 litres – Synthetic 80W140
CUTTER HEAD
Width:………........................610mm (24”)
Diameter:………...................560mm (22”)
Rotation speed:………….......810, 815 or 1033 rpm
To Next Page
Loading...