A-10
3-3. Environmental Conditions for Storage and
Transportation
Environmental conditions for storage and transportation
The conditions in which the machine is stored or transported greatly affect the machine's accuracy when it
is operated again after such processes.
Ambient temperature
(room temperature)
5 to 40°C
Ambient relative
humidity
35 to 70% (no condensation)
Machine anchors are optionally available. They are designed to provide human/equipment protection in
the event of an earthquake or other disaster. It is recommended that the machine is secured with these
anchors.
Avoid places where noise, vibration, heat or oil mist is generated, or near the fans and ventilation
openings.
Drain water from the machine before storing or transporting the machine.
Before starting operation of the machine after storage or transport, make sure to grease its driving axes.
If the machine is used or kept in the environment where dirt and dust float around, precision parts of the
machine may be worn out or get dirty quickly, which could shorten the part life or adversely affect
processing and part quality.
If you need to use or keep the machine in the environment where dirt and dust float around, please
consult DISCO sales representatives.
To Next Page
Loading...