DISCO DAG810 User Manual

2016-06
INSTALLATION MANUAL
Automatic Surface Grinder
DAG810
Software Version: JUM0001***
Copyright of this document is owned by DISCO CORPORATION
("DISCO"). No part of this document may be copied or reproduced
in any form or by any means, without the express written permission
of DISCO. Also, this document may not be disclosed or transferred
to third parties.
UJUSNE*003F
This document is printed on recyclable Lint-Free Paper.
- The blue paper is recyclable as used paper just like plain paper.
- The cover paper and adhesive portions are non-recyclable.
(Remove the cover and adhesive portions before recycling.
Recycle the blue paper only.)

DISCO DAG810 Specifications

General

Brand	DISCO
Model	DAG810
Category	Grinder
Language	English

Summary

Introduction to the Installation Manual

About this manual

Describes the content and purpose of the installation manual.

Safety in Installation

Emphasizes reading and understanding the manual for safe installation and adjustment.

Manager and Operator Roles

Defines the roles and responsibilities of managers and operators for the machine.

Specifications and Environmental Requirements

Machine Specifications

Details the technical specifications of the Automatic Surface Grinder DAG810.

Machine Dimensions and Delivery Mass

Provides physical dimensions and weight of the machine upon delivery.

Installation Space and Environmental Conditions

Covers installation space, environmental requirements, and conditions for storage/transport.

Piping and Wiring Diagrams

Illustrates rear panel connection ports and overall piping/wiring diagrams for the machine.

Installation and Relocation of Machine

Machine Installation Procedures

Details the step-by-step procedures for installing the machine.

Hoisting, Transferring, and Leveling

Covers critical steps for safely moving and positioning the machine.

Piping and Power Cable Connections

Outlines procedures and cautions for connecting air, water piping, and power cables to the machine.

System Checks and Supply

Details procedures for air supply, coolant water supply, and flow checks for operational readiness.

Machine Relocation Procedures

Outlines the procedures for terminating operation, preparing, and transferring the machine.

Emergency Contact Information

DISCO and Agent Office Contacts

Lists DISCO offices and agent offices worldwide for support and inquiries.

Accident Response Protocol

Instructs users to contact DISCO immediately if an accident occurs involving the equipment.