Introduction-1
INTRODUCTION
About this manual
This manual describes the installation procedures of Automatic Surface Grinder Model DAG810.
To ensure safety
To ensure safety, be sure to thoroughly read and understand the contents of this manual before installing
and adjusting the machine.
Note that this manual is based on the software of version JUM0001***.
In installing and adjusting the machine, which must be performed by qualified maintenance personnel
(hereinafter referred to as maintenance personnel) who have completed DISCO's maintenance training,
make sure that the procedures set forth in this manual are followed.
This manual is the 'Original instructions'.
Definition of a manager and an operator
This manual defines a manager and an operator of the machine as follows:
Category Applicable Personnel Job and Responsibility
Manager
Management
representative
Engages in overall management of the machine and its
operators.
Maintenance personnel
Qualified person who has completed DISCO's machine
maintenance training to engage in maintenance of the
machine.
Data maintenance
personnel
Qualified person to manage the software data of the
machine.
Operator
Machine operator
Engages in operation of the machine for processing
workpieces.
Documentation for this machine
This manual is the Installation Manual in the list below indicated by an arrow.
Manual Who should read Contents
Safety Manual
・Management
representative
・Data maintenance
personnel
・Maintenance personnel
Information for ensuring safety during
machine operation, installation and
maintenance
Installation Manual Maintenance personnel
Machine installation and adjustment
procedures
Operation Manual Machine operator
Operational procedures to be performed by the
machine operator
Data Maintenance
Manual
Data maintenance personnel
Screen contents for data entry and machine
operation data setting procedures
Maintenance Manual Maintenance personnel
Servicing, inspection and adjustment
procedures to be performed by the customer
Technical Reference Maintenance personnel
Machine specifications/
Circuit diagrams/Illustrations/Part list
To Next Page
Loading...