B-37
1-8-2. Removal of Y-axis Retainer Jig
Equipment you must have ready
Allen wrench (5 mm)
Procedures to remove the Y-axis retainer jig from the machine
Step No.
Procedure
(Continued from the previous section)
1
Remove the Y-axis retainer jig (red) from the machine. To remove the retainer jig, you
should first remove the 4 hexagon socket-head screws (M6) fixing the jig.
Y-axis retainer jig
2
Put the removed jig in safe keeping.
Continued in the next section.
To Next Page
Loading...