B-14
1-4. Installation of Machine Anchors [Optional Accessory]
Equipment you must have ready
The following tools should be readied to install the machine anchors. The floor work for anchorage should
be made by the user.
Allen wrench (5 mm, 6 mm)
Adjustable wrench
Anchor bolt (M16×4pcs)
Procedures to install machine anchors
Step No.
Procedure
(Continued from the previous section)
1
Referring to the figure below, install the machine anchors (2 pcs at each side of the
machine).
(Unit：mm)
Main body frame
Floor
Nut
Hexagon socket-head
screw (M8 × 2 pcs)
Hexagon socket-head
screw (M6 × 3 pcs)
Continued in the next section.
To Next Page
Loading...