DISCO DAG810 - Terminating Machine Operation; Water Purge (by DISCO Customer Engineers

B-53
2-1. Terminating Machine Operation
Procedures to terminate machine operation
WARNING
Do not place your fingers or hands beneath the wheel
The wheel has a sharp blade edge. If your fingers or hands come into contact with it,
they may be wounded or cut off.
Step No. Procedure
1
Terminate machine operation referring to Section 4 [Termination of Machine Operation]
in Chapter B of the Operation Manual.
Continued in the next section.
2-2. Water Purge (by DISCO Customer Engineers)
Water purge
Before transporting the machine by truck or ship, it is necessary to drain the water hoses of the machine.
Ask DISCO customer engineers for draining work when you relocate the machine.
WARNING
Contact your nearest DISCO office for the draining work required before
machine transfer, since the special tools and jigs are used for the work
When relocating the machine out of plant (involving transportation by truck or ship),
it is necessary to drain the water hoses of the machine. If the machine is transported
without draining the hoses, it may fail or break due to freezing or leaking of water
remained in them.