DISCO DAG810 - Piping and Wiring Diagrams

A-12
4-1. Rear Panel Connection Ports
Rear panel piping and wiring connection ports
Spindle Coolant
Supply Unit
(optional
accessory)
Duct unit
(optional accessory)
UPS
(optional
accessory)
Vacuum unit
(optional
accessory)
Water temperature control
unit (optional accessory)
Booster pump
unit (optional
accessory)
Machine configuration Pipe/wire No. to be used
DAG810 1, 2, 6, 7, 8, 12
DAG810 + Vacuum unit
1, 2, 5～12, 14
DAG810 + Vacuum unit + Booster pump unit
1, 3, 5～12, 14
DAG810 + Vacuum unit + Duct unit
1, 3, 5～12, 13, 14
DAG810 + Spindle coolant supply unit
1, 2, 8, 12, 20～23
DAG810 + Vacuum unit + Spindle coolant supply unit
1, 2, 5～12, 14, 20～23
DAG810 + Vacuum unit + Duct unit + DTU152
1, 4, 5, 8～11, 13～19
No. Name
Applicable hose
(Unit: mm)
Connection Port
(*1)
1 Air supply
Braided hose
(15 ID × 22 OD)
Rc3/8
(*2)
2
Wheel coolant/cleaning water supply
(Standard)
Braided hose
(19 ID × 26 OD)
Rc3/4
(*2)
3
Wheel coolant/cleaning water supply
(Booster pump)
Braided hose
(19 ID × 26 OD)
Rp3/4
(*2)
4
Wheel coolant/cleaning water supply
(DTU152)
Braided hose
(25 ID × 33 OD)
Rc1/1
(*2)
5 Vacuum unit supply water (Standard)
Braided hose
(12 ID × 18 OD)
Rp3/8
(*2)