B-11
Procedures to transfer the machine to the installation site
Step No.
Procedure
(Continued from the previous section)
1
Wear safety shoes and protective gloves.
2
Before transferring the machine, check to make sure that the 6 adjuster feet at its bottom
are equal in height.
3
Insert the fork of the forklift under the machine.
・Check to be sure that the gravity center of the machine is on the center of the fork.
Gravity center
4
Transfer the machine to the installation site.
5
When the machine arrives at the installation site, gradually lower the fork until the
machine is landed on the floor.
Continued in the next section.
To Next Page
Loading...