SK3000 Operator’s Manual Controls - 43
Display
Spool Mode Select Screen
Item Description IMPORTANT
1. Motor spool mode To enter motor spool
mode, press.
In this mode:
• High/low circuit will have ramp
up and ramp down.
• Ramping time can be adjusted by
dealer.
2. Cylinder spool mode To enter cylinder spool
mode, press.
NOTICE: Machine and attachment
damage can occur if motor
attachment is used in cylinder mode.
In this mode:
• High/low circuit will immediately
open and close according to input
control.
• There is no ramping.
t62om004w21.eps
2
1
AUX
AUX
AUX
L/H
AUX
To Next Page
Loading...
