dji AGRAS T30

©
2022 DJI All Rights Reserved.
69
AGRAS T30
Unmanned Aircraft Flight Manual
Firmware Update
A DJI account is required for rmware updates. Login or register an account.
Exporting Log
View all the logs of the remote controller and select the logs to export.
DO NOT power off the remote controller during the update.
DO NOT perform the rmware update while the aircraft is in the air. Only carry out the rmware
update when the aircraft is on the ground.
The remote controller may become unlinked from the aircraft after the rmware update. Relink
the remote controller and aircraft if necessary.
Intelligent Flight Battery
Battery Functions
1. Battery Level Display: The status LEDs indicate the current battery level. Press the power button to
check.
2. Communication: Battery parameters including the voltage and power level are transmitted to the
aircraft to enable the aircraft to take appropriate action when battery parameters change.
3. Charging Error Detection: Errors that occur during charging are indicated by the status LEDs. When
an error occurs, disconnect the battery and wait for the battery to x the error automatically. For more
information, refer to the LED Patterns section.
4. Battery Error Records: The battery records errors such as excessive charging or discharging,
exceeding the temperature range when charging and discharging, and storing a battery for an
extended period with the power level outside of the recommended range. The battery error records
can be accessed by authorized DJI dealers when troubleshooting or repairing.
5. Auto Balancing: In certain situations, the battery automatically balances the voltages of the cells.
6. Auto Discharging: If fully charged for more than one day, the battery automatically discharges to
97%. After 7 days, it automatically discharges to 60%.
7. Auto Current Adjustment: When using with the provided battery station, the battery intelligently
adjusts the charging current based on the temperature of the battery cell. The battery also supports
self-protection based on the environment temperature.
8. Temperature Control: The battery ensures the temperature difference between the battery cells are
the same and stay within the allowable temperature range.
• Refer to the safety requirements listed on the label of the battery before using for the
rst time. Users accept full responsibility for any violations of the safety requirements
stated on the label.
• The product warranty is void if any battery errors occur due to misuse of the battery.
Using the Battery
Press and then press and hold the power button to power on the battery after it is connected to the
aircraft. When the aircraft lands and the motors stop, press and then press and hold the power button
to power o the battery, and then disconnect the battery from the aircraft.