dji AGRAS T30

80
©
2022 DJI All Rights Reserved.
AGRAS T30
Unmanned Aircraft Flight Manual
T30 Drone Recommended Maintenance Cycle
Part for service Module Recommended service time
Recommended replacement
cycle
Propulsion system
- motor
Motor
1. Carry out the rst inspection for a new
drone after 100 ights.
2. Carry out an inspection every 100 ight
hours after the rst inspection.
3. If an ESC is stalling, and temperature of
the motor/ESC is abnormal, carry out this
inspection.
Replacement after 1,000
ight hours of usage is
recommended.
Propulsion system
- motor base
Motor Base
1. Carry out the rst inspection for a new
drone after 100 ights.
2. Carry out an inspection every 100h after
the rst inspection.
3. If an ESC is stalling, and temperature of
the motor/ESC is abnormal, carry out this
inspection.
Replacement after 1,000h of
usage is recommended.
Propulsion system
- ESC xing piece
ESC Fixing
Piece
1. Carry out the rst inspection for a new
drone after 100 ights.
2. Carry out an inspection every 100h after
the rst inspection.
Replacement after 1,000
ight hours of usage is
recommended.
Propulsion system
- propellers
Propellers
1. Carry out the rst inspection for a new
drone after 100 ights.
2. Carry out an inspection every 100h after
the rst inspection.
3. If an ESC is stalling, and temperature of
the motor/ESC is abnormal, carry out this
inspection.
Replacement after 700
ight hours of usage is
recommended.
Propulsion system
- propeller adapter
Propeller
Adapter
Before daily operation preparation
Replacement after 1,000
ight hours of usage is
recommended.
Propulsion system
- screw bolts of
frame arm
Screw Bolts of
Frame Arm
Before daily operation preparation
Replacement after 1,000
ight hours of usage is
recommended.
Aircraft
components -
screws
Securing
screws of
aircraft arm
buckle
Every 100 ight hours
Replacement after 1,000
ight hours of usage is
recommended.
Aircraft
components -
connector
Aircraft
Connector
Every 100 ight hours
Replacement after 1,000
ight hours of usage is
recommended.
Landing gear
components -
screws
Screws
Securing the
Middle Frame
Every 100h
Replacement after 1,000
ight hours of usage is
recommended.
Landing gear
components -
screws
Screw Bolts
Securing the
Landing Gear
Every 100 ight hours
Replacement after 1,000
ight hours of usage is
recommended.
Landing gear
components -
screws
Landing Gear
Screws
Every 100 ight hours
Replacement after 1,000h of
usage is recommended.