dji AGRAS T30

64
©
2022 DJI All Rights Reserved.
AGRAS T30
Unmanned Aircraft Flight Manual
System Data Protection
In Route or A-B Route operation mode, the System Data Protection feature enables the aircraft to retain
vital system data such as operation progress and breakpoints after the aircraft is powered off to replace
a battery or rell the spray tank. Follow the instructions in Operation Resumption to resume the operation
after restarting the aircraft.
During Route operations, in situations such as when the app crashes or the remote controller
disconnects from the aircraft, the breakpoint will be recorded by the flight controller and recovered
automatically in the app once the aircraft is reconnected. If recovery is not performed automatically,
users can perform the operation manually. Go to Operation View, select
, , then Advanced Settings,
and tap Continue Unnished Task. Recall the operation in the Executing tag in the operation list.
Empty Tank Warning and Smart Supply Reminder
Prole
The T30 features empty tank warnings and smart supply reminder functions. The aircraft calculates the
empty tank and rell points according to the preset remaining liquid level threshold, current remaining
liquid level, aircraft status, and operation parameters and displays the points on the map. In Route
operations, users can set the action the aircraft will perform for empty tank and rell points. For A-B
Route, Manual, and Manual Plus operations, users can only set the empty tank warning and the action
the aircraft will perform at the empty tank point.
The empty tank point will not be displayed on the map if the tank is not calculated to run out
before the end of the task route.
For Route operations, when adding liquid to the spray tank or adjusting the operation
parameters, the empty tank point will update dynamically on the operating route according to
the amount of added liquid and the adjusted settings.
Usage
1. In Aircraft settings, set the empty tank action and also enable this action to be performed when
reaching a rell point. In Spraying System settings, enable the display of empty tank and rell points.
2. When an empty tank warning appears in the app, the sprinklers automatically turn off and the aircraft
performs the preset empty tank action.
2. Make sure that the aircraft is in Manual operation mode. Land the aircraft and stop the motors. Rell
the spray tank and tightly secure the cover.
3. Take off in Manual operation mode and y the aircraft to a safe position. Select an operation mode.
Return to Home (RTH)
Home Point: The default home point is the first location where your aircraft received strong
GNSS signals
. Note that the white GNSS icon requires at least four bars before the signal is
strong.
RTH: RTH brings the aircraft back to the last recorded home point.
There are three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH.