dji MINI 4 PRO - Regulatory Compliance and Disposal

DJI Mini 4 Pro
User Manual
©
2023 DJI All Rights Reserved.
113
C0 Certication
DJI Mini 4 Pro (Model: MT4MFVD) is compliant with the requirements of C0 certication. There
are some requirements and restrictions when using DJI Mini 4 Pro in European Economic Area
(EEA, i.e. EU plus Norway, Iceland and Liechtenstein). DJI Mini 4 Pro and its similar products can
be distinguished by the model number.
UAS Class C0
Maximum Propeller Speed 10700 RPM
MTOM Statement
DJI Mini 4 Pro is a quadrotor aircraft. The MTOM of DJI Mini 4 Pro (Model: MT4MFVD) is 249 g,
which is compliant with the requirements of C0 certication.
Users must follow the instructions below to comply with the MTOM C0 requirements.
Otherwise, the aircraft cannot be used as a C0 aircraft:
1. DO NOT add any payload to the aircraft except the items listed in the List of Items including
qualied accessories section.
2. DO NOT use any non-qualified replacement parts, such as intelligent flight batteries or
propellers, etc.
3. DO NOT retrot the aircraft.
• The prompt "Low Battery RTH" will not appear in case of a horizontal distance between
the pilot and aircraft is lower than 5 m.
• FocusTrack will exit automatically if the horizontal distance between the subject and the
aircraft is further than 50 m (when using FocusTrack in the EU).
List of Items Including Qualied Accessories
Item Model Number Dimensions Weight
DJI Mini 3 Pro Propellers MT3M3VD-PPS
152.4 × 76.2 mm
(Diameter × Thread Pitch)
0.9 g (each piece)
DJI Mini 4 Pro Intelligent
Flight Battery
BWX140-2590-7.32 85 ×54 ×30 mm Approx. 77.9 g
DJI Mini 4 Pro ND Filters
Set (ND 16/64/256)*
MT4MFVD-NDFS 22 × 17 × 4 mm 0.65 g (Individual)
DJI Mini 4 Pro Wide-Angle
Lens*
MT4MFVD-WAL 22 × 17 × 9 mm 2.25 g
microSD Card* N/A 15 × 11 × 1.0 mm Approx. 0.3 g
* Not included in the original package.
For how to install and use the ND Filters Set and the Wide-Angle Lens, refer to the Product Information for
the two accessories respectively.