DJI Mini 4 Pro
User Manual
©
2023 DJI All Rights Reserved.
15
DJI RC 2 Remote Controller
1
6
2
7
3
8
4
9
5
10
11
12
13
14
15
1. Control Sticks
Use the control sticks to control the
aircraft movements. Set the control stick
mode in DJI Fly. The control sticks are
removable and easy to store.
2. Antennas
Transmit aircraft control and video
wireless signals.
3. Status LED
Indicates the status of the remote
controller.
4. Battery Level LEDs
Displays the current battery level of the
remote controller.
5. Flight Pause/Return to Home (RTH)
Button
Press once to make the aircraft brake and
hover in place (only when GNSS or Vision
Systems are available). Press and hold to
initiate RTH. Press again to cancel RTH.
6. Flight Mode Switch
For switching between three ight modes:
Cine, Normal, and Sport mode.
7. Power Button
Press once to check the current battery
level. Press, and then press and hold to
power the remote controller on or off.
When the remote controller is powered
on, press once to turn the touchscreen
on or o.
8. Touchscreen
Touch the screen to operate the remote
controller. Note that the touchscreen is
not waterproof. Operate with caution.
9. USB-C Port
For charging and connecting the remote
controller to your computer.
10. microSD Card Slot
For inserting a microSD card.
11. Gimbal Dial
Controls the tilt of the camera.
12. Record Button
Press once to start or stop recording.
13. Camera Control Dial
For zoom control. Set the function in DJI
Fly by entering Camera View > Settings >
Control > Button Customization.
14. Focus/Shutter Button
Press halfway down on the button to
autofocus and press all the way down
to take a photo. Press once to switch to
photo mode when in record mode.
15. Speaker
Outputs sound.
To Next Page
Loading...
Need help?
General
