To Next Page

To Previous Page

DJI Mini 4 Pro

User Manual

• A gimbal motor may enter protection mode if the gimbal is obstructed by other objects

when the aircraft is put on uneven ground or on grass, or if the gimbal experiences an

excessive external force, such as during a collision.

• DO NOT apply external force to the gimbal after the aircraft is powered on.

• DO NOT add any extra payload other than an official accessory to the gimbal, as

this may cause the gimbal to function abnormally or even lead to permanent motor

damage.

• Remove the gimbal protector before powering on the aircraft. Attach the gimbal

protector when the aircraft is not in use.

• Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure.

The gimbal will recover full functionality once it is dry.

Camera Prole

DJI Mini 4 Pro uses a 1/1.3-in CMOS sensor with 48MP eective pixels. The equivalent focal length is

approximately 24 mm. The aperture of the camera is F1.7 and shoots from 1 m to innity.

The DJI Mini 4 Pro camera can take 48MP stills and supports shooting modes such as Single, Burst,

AEB, Timed Shot, and Panorama. It also supports H.264/H.265 video recording, digital zoom, and

slow motion recording. 4K 60fps HDR and 4K 100fps videos are also supported.

• DO NOT expose the camera lens in an environment with laser beams, such as a laser

show, or point the camera at intense light sources for an extended period, such as the

sun on a clear day, in order to avoid damaging the sensor.

• Make sure the temperature and humidity are suitable for the camera during use and

storage.

• Use a lens cleanser to clean the lens to avoid damage or poor image quality.

• DO NOT block any ventilation holes on the camera as the heat generated may damage

the device and injure the user.

• The cameras may not focus correctly in the following situations:

a. Shooting dark objects far away.

b. Shooting objects with repeating identical patterns and textures or objects without

clear patterns or textures.

c. Shooting shiny or reective objects (such as street lighting and glass).

d. Shooting ashing objects.

e. Shooting fast-moving objects.

f. When the aircraft/gimbal is moving fast.

g. Shooting objects with varying distances in the focus range.

• DJI Mini 4 Pro uses SmartPhoto mode by default in Single Shot, which integrates

features such as scene recognition or HDR for optimal results. SmartPhoto needs to

take multiple shots continuously for image synthesis. When the aircraft is moving or

using the 48MP resolution, SmartPhoto will not be supported, and the image quality will

dier.

Questions and Answers:

Need help?

Do you have a question about the dji MINI 4 PRO and is the answer not in the manual?

dji MINI 4 PRO Specifications

General