EasyManuals Logo

dji MINI 4 PRO User Manual

dji MINI 4 PRO
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
DJI Mini 4 Pro
User Manual
©
2023 DJI All Rights Reserved.   
89
Remote Controller Alert
The remote controller sounds an alert during RTH. The alert cannot be canceled. The remote
controller sounds an alert when the battery level of the remote controller is low (6% to 10%). A
low battery level alert can be cancelled by pressing the power button. The critical low battery
level alert, which is triggered when the battery level is less than 5%, cannot be canceled.
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the antennas
are positioned in relation to the aircraft as illustrated below.
DO NOT use other wireless devices operating at the same frequency as the remote
controller. Otherwise, the remote controller will experience interference.
A prompt will be displayed in DJI Fly if the transmission signal is weak during ight.
Adjust the remote controller orientation to make sure that the aircraft is in the
optimal transmission range.
Weak Signal
Optimal Transmission Zone

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji MINI 4 PRO and is the answer not in the manual?

dji MINI 4 PRO Specifications

General IconGeneral
Weight249 g
Max Flight Time34 minutes
Camera Sensor1/1.3-inch CMOS
Max Descent Speed5 m/s
Max Horizontal Speed16 m/s
Max Wind Speed Resistance10.7 m/s (Level 5)
Effective Pixels48 MP
ISO Range Video100-6400
ISO Range Photo100-6400
Max Video Bitrate150 Mbps
Video Transmission SystemO4
Live View Quality1080p/60fps
Max Speed16 m/s
Charging Time64 minutes
GNSSGPS+Galileo+BeiDou
Max Video Resolution4K
Max Transmission Range20 km
Obstacle SensingOmnidirectional
Dimensions (Folded)148×94×64 mm
LensFOV 82.1°, f/1.7
Digital Zoom4x
Gimbal3-axis (tilt, roll, pan)
Operating Frequency2.4000-2.4835 GHz, 5.725-5.850 GHz
Operating Temperature-10° to 40° C

Related product manuals