To Next Page

To Previous Page

DJI Mini 4 Pro

User Manual

Flight Recorder

Flight data including flight telemetry, aircraft status information, and other parameters are

automatically saved to the internal data recorder of the aircraft. The data can be accessed using

DJI Assistant 2 (Consumer Drones Series).

Propellers

There are two types of propellers, which are designed to spin in dierent directions. Marks are

used to indicate which propellers should be attached to which motors. Make sure to match the

propellers and motors by following the instructions.

Propellers Marked Unmarked

Illustration

Mounting Position

Attach to the motors of the marked

arm

Attach to the motors of the

unmarked arm

Attaching the propellers

Attach the marked propellers to the motors of the marked arm, and the unmarked propellers to

the motors of the unmarked arm. Use the screwdriver from the aircraft package to mount the

propellers. Make sure the propellers are secure.

• Make sure to only use the screwdriver from the aircraft package for mounting

propellers. Using other screwdrivers may damage the screws.

• Make sure to keep the screws vertical while tightening them. The screws should not be

at a tilted angle to the mounting surface. After installation is complete, check whether

the screws are ush and rotate the propellers to check for any abnormal resistance.

Detaching the propellers

Use the screwdriver from the aircraft package to loosen the screws and detach the propellers

from the motors.

MarkedUnmarked

Questions and Answers:

Need help?

Do you have a question about the dji MINI 4 PRO and is the answer not in the manual?

dji MINI 4 PRO Specifications

General