To Next Page

To Previous Page

DJI Mini 4 Pro

User Manual

DJI RC-N2

The DJI RC-N2 remote controller features O4 video transmission when used with DJI Mini 4 Pro,

the remote controller works at 2.4 GHz, 5.8 GHz and 5.1 GHz frequency bands. The remote

controller is also capable of selecting the best transmission channel automatically and can

transmit 1080p 60fps HD live view from the aircraft to DJI Fly on a mobile device (depending on

mobile device performance) at a maximum transmission range of 20 km (12.4 mi) (compliant

with FCC standards, and measured in a wide open area without interference). Users can control

the aircraft and change the settings easily within this range. The retractable mobile device

holder can be used to place mobile devices stably, and the control sticks are removable and

easy to store.

The built-in battery has a capacity of 5200 mAh and power of 18.72 Wh that supports a

maximum run time of six hours (when not charging the mobile device).

• The 5.1 GHz band can be used only in countries and regions where it is permitted by

local laws and regulations.

Operation

Powering On/O

Press the power button once to check the current battery level.

Press once, then press and hold for two seconds to power the remote controller on or o.

Charging the Battery

Connect the charger to the USB-C port on the remote controller.

Controlling the Gimbal and Camera

1. Shutter/Record Button: Press once to take a photo or to start or stop recording.

2. Photo/Video Toggle: Press once to switch between photo and video mode.

Questions and Answers:

Need help?

Do you have a question about the dji MINI 4 PRO and is the answer not in the manual?

dji MINI 4 PRO Specifications

General