dji RONIN 2 - Remote Controller; Remote Controller Overview

©
2017 DJI OSMO All Rights Reserved.
33
Remote Controller
Remote Controller Diagram
1
2
3
5
6
7
8
9
10
11
12
13
15
14
16
4
17
19
18
1. Built-in Antenna
Do not obstruct the antenna.
2. Pan Axis Speed Control Knob
Turn this Speed Control Knob to adjust the maximum speed of the pan axis.
3. Tilt Axis Speed Control Knob
Turn this Speed Control Knob to adjust the maximum speed of the tilt axis.
4. Roll Axis Speed Control Knob
Turn this Speed Control Knob to adjust the maximum speed of the roll axis.
5. Power Button
Press and hold the power button to turn on/off the remote controller.
6. Status LED
If the Status LED glows solid green, it is connected to the gimbal. If the status LED
glows solid red, the remote controller is disconnected from the gimbal. Blinking red
means the remote controller and gimbal are binding.
7. Mode Switch
Switches between the different follow modes: Free, Follow, and Recenter.
8. Roll Knob
Turn the knob to control roll axis movements (default settings can be changed).
9. Control Joystick
Push the Control Joystick up or down to control tilt axis movement. Push the Control
Joystick left or right to control pan axis movement (default settings can also be
changed).