dji Ronin-MX User Manual

©
2016 DJI All Rights Reserved.
43
Adding a Third-Party Transmitter/Receiver
The Ronin-MX supports third-party transmitters/receivers, such as D-Bus. Connect the
transmitter through the integrated port (refer to the Ronin-MX Diagram for the location of
the D-Bus port).
Maintenance
The gure below shows the proper conguration for transporting the Ronin-MX with the
Tuning Stand. Using the hook-and-loop straps, lock the Ronin-MX in place, as shown. Be
sure to remove the straps prior to turning the Ronin-MX on again.
The Ronin-MX is a precise machine and is not waterproof. Keep it away from sand and
dust when in use. After use, it is recommended that you wipe the Ronin-MX down with a
soft dry cloth. Never spray any cleaning liquids onto the Ronin-MX.

dji Ronin-MX Specifications

General

Bluetooth	Yes
Type	Hand camera stabilizer
Material	Magnesium
Motorized	-
Pan range	0 - 360 °
Product color	Black
Number of axis	3
Tilt angle range	-150 - 270 °
Angle of rotation	360 °
Compatible products	ARRI ALEXA MINI, RED DRAGON, CANON 5D, Blackmagic Design Production Camera
Maximum weight capacity	4.5 kg

Weight and Dimensions

Depth	370 mm
Width	560 mm
Height	440 mm
Weight	2770 g