4
©
2016 DJI All Rights Reserved.
Introduction
Developed for lmmaking professionals, the DJI Ronin-MX is designed for both handheld
use and mounting to a DJI Matrice 600 aircraft for capturing amazing footage from the air.
It can also be used on moving vehicles, camera jibs or wirecams. The technology built
into the DJI Ronin-MX allows a broad spectrum of camera setups of varying sizes and
weights to be stabilized during lming.
The built in slip ring on the Ronin-MX allows for 360 degrees of continuous rotation. When
used with the DJI SRW-60G, the Ronin-MX can rotate unobstructed while transmitting HD
video. It can also be connected to DJI Lightbridge 2 for long range video transmission
during aerial use. The Ronin-MX is also compatible with the DJI Focus.
The brushless gimbal stabilization system is more than just three brushless motors
moving on three axes. The motors work with position feedback and the IMU (Inertial
Measurement Unit) to communicate with DJI’s custom-built 32-bit processor, which
processes movement calculations in milliseconds. This reduces angular vibration to less
than 0.02˚ of translated movement, meaning that the camera will remain steady and the
motor can be absolutely silent. The Ronin-MX can be used in different operation modes
such as Underslung Mode, Upright Mode and Briefcase Mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
