DMP Electronics XTLplus SERIES - Detect Wireless Jamming

XTLplus Installation and Programming Guide Digital Monitoring Products
25
SYSTEM OPTIONS
GMT City/Time Zone GMT City/Time Zone
0 London,Monrovia,Lisbon,Dublin,Casablanca,Edinburgh 13 New Cadelonia
1 Cape Verde Island, Azores 14 Guam, Sydney
2 Mid-Atlantic,FernandodeNoronha 15 Tokyo, Seoul
3 BuenosAires,Georgetown,Brasilia,RiodeJaneiro 16 HongKong,Singapore
4 AtlanticTime(Canada),Caracas,LaPaz,Santiago 17 Bangkok,Hanoi
5 EasternTime(US,Canada)Bogota,Lima,Arequipa 18 Dhaka,Almaty
6 CentralTime(US,Canada),MexicoCity,Saskatchewan 19 Islamabad,Karachi
7 MountainTime(US,Canada),Edmonton 20 AbuDhabi,Kazan
8 PacicTime(US,Canada),Tijuana 21 Moscow,Bagdad
9 Alaska 22 Eastern Europe
10 Hawaii 23 Rome, Paris, Berlin
11 Midway Island, Samoa
12 Fiji,MarshallIsland,Wellington,Auckland,Kwajalein,Kamchatka
28.14 Time Display
YES allows the keypad to display the time and day in the Status List. When NO is
selected, time and day of the week are not displayed.
28.15 House Code
A Wireless House Code between 1 and 50 is pre-programmed at the factory. To
change the house code, press any select area. Enter a House Code from 1 to 50 and
press the CMD button. The XTLplus automatically programs the house code into the
wireless transmitters when the unique transmitter serial number is programmed
into the panel. See Wireless programming in Zone Information. The house code
identies the panel, receiver, and transmitters to each other. When operating,
the receiver listens for transmissions that have the programmed house code and
transmitter serial number.
28.15.1 Detect Wireless Jamming
When enabled and the receiver detects jamming, a trouble or alarm message is
sent to the receiver and displays in the Status List. Select YES to enable jamming
messages to display in the Status List. Select NO to disable jamming messages.
Default is NO.
28.15.2 Wireless Audible Annunciation
Press any top row key to select the keypad buzzer annunciation method for
wireless low battery and missing messages.
Select ANY to enable annunciation anytime.
Select DAY to enable annunciation except during sleeping hours (9 PM to 9 AM).
Select MIN (minimum) to annunciate only Fire zones during daytime hours (9 AM to
9 PM). Default is DAY.
28.16 Enable Keypad Panic Keys
This option allows the two-button panic key operation selected at a keypad to send
the Panic, Emergency, or Fire message to the central station receiver. Select YES to
enable the two-button panic operation. To disable the two-button panic operation,
select NO. Default is YES.
28.17 Occupied Premises
Select YES to allow the panel to automatically disarm the interior area(s) when
arming all areas and a perimeter zone is not tripped during the exit delay.
This False Alarm Reduction feature keeps a user from arming the entire system
when they do not exit and remain in the premises. Select NO to not automatically
disarm interior area(s). Default is NO.
28.18 Use False Alarm Question
Select YES to display IS THIS A FALSE ALARM? NO YES at the keypad in place of
CANCEL VERIFY when a burglar alarm occurs. Select NO to display CANCEL VERIFY
for burglar alarms. This operates for ALL/PERIM and HOME/SLEEP/AWAY arming
systems. Default is YES.
28.19 Weather Zip Code
This option allows local U.S.A. weather updates to display in the Status List on the
keypad. Enter the zip code of the user at this option. When no number is entered
weather conditions are not displayed. Default is -.
TIMEDSP NO YES
HOUSECODE: -
DET JAMNG NO YES
WLS AUDIBLE:DAY
ANY DAY MIN
KPDPANCSNOYES
OCCUPIEDPREMISE
NO YES
USEFALSEALARM
QUESTION?NOYES
ENTER WEATHER
ZIPCODE: -