Setting Name Description
Active Lane Management
This setting will alert the driver by vibrating the steering wheel and moving the steering wheel when a lane departure is
detected. The available options within Active Lane Management are Lane Management “Vibration Only”, “Steering Assist
Only”, and “Vibration + Steering Assist”; Lane Warning “Early”, “Medium”, and “Late”; Vibration Strength “Low”, “Medium”
and “High”; and Steering Assist Strength “Low”, “Medium” and “High”.
ParkSense
This setting will change the type of ParkSense alert when a close object is detected and can provide both an audible
chime and a visual display.
Front ParkSense Volume This setting adjusts the volume of the Front ParkSense system. The available settings are “Low”, “Medium”, and “High”.
Rear ParkSense Volume This setting adjusts the volume of the Rear ParkSense system. The available settings are “Low”, “Medium”, and “High”.
Rear ParkSense Braking Assist This setting will turn the Rear ParkSense Braking Assist on or off.
Blind Spot Alert
This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Off” setting will
turn off Blind Spot Alert. The “Lights” setting will activate the Blind Spot Alert lights on the outside mirrors. The “Lights &
Chime” setting will activate both the lights on the outside mirrors and an audible chime.
Electric Power Steering Default This setting will change the Electric Power setting to “Normal”,” Sport”, or “Comfort”.
Paddle Shifters This setting will turn the paddle shifters on or off.
LaneSense Warning — Located In LaneSense
Submenu
This setting will change the distance at which the steering wheel will provide lane departure feedback. The available set-
tings are “Early”, “Medium”, and “Late”.
LaneSense Strength — Located In LaneSense
Submenu
This setting will change the strength of the steering wheel feedback during a lane departure. The available settings are
“Low”, “Medium”, and “High”.
Trailer Length For Blind Spot Alert
This setting will detect the length of a trailer. Auto will automatically detect the length. Max sets all trailers to 39.5 ft.
(12 meters).
ParkView Backup Camera Delay This setting will add a timed delay to the ParkView Backup Camera when shifting out of REVERSE.
ParkView Backup Camera Active Guidelines This setting will turn the ParkView Backup Camera Active Guidelines on or off.
Hill Start Assist This setting will turn the Hill Start Assist system on or off.
Rear Seat Alert
When this setting is turned on and the rear doors are opened while the engine is running, or if the engine is turned on
within 10 minutes of the door opening, a message will appear to check the rear seat when the vehicle is powered OFF.
MULTIMEDIA 135
5
To Next Page
Loading...
