Dodge DURANGO 2023 - Engine Fluids and Lubricants - Non-Srt; Chassis Fluids and Lubricants - Non-Srt

ENGINE FLUIDS AND LUBRICANTS — NON-SRT
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile
(240,000 km) Formula OAT (Organic Additive Technology) meeting the requirements of
the manufacturer Material Standard MS.90032.
Engine Oil – 3.6L & 5.7L Engine
We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the
requirements of the manufacturer Material Standard MS-6395. Equivalent full syn-
thetic SAE 0W-20 engine oil can be used but must have the API Starburst trademark
page 214.
Fuel Selection – 3.6L Engine 87 Octane (R+M)/2 Method , 0-15% Ethanol (Do not use E-85).
Fuel Selection – 5.7L Engine
89 Octane Recommended - 87 Octane Acceptable (R+M)/2 Method, 0-15% Ethanol
(Do not use E-85).
CHASSIS FLUIDS AND LUBRICANTS — NON-SRT
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission
Use only Mopar® ZF8&9Speed ATF Automatic Transmission Fluid or equivalent. Fail-
ure to use the correct fluid may affect the function or performance of your
transmission.
Transfer Case We recommend using Mopar® ATF+4 Automatic Transmission Fluid.
Axle Differential (Front-Rear) – Without Electronic Limited-Slip Differential (ELSD) We recommend using Mopar® GL-5 Synthetic Axle Lubricant SAE 75W-85.
Axle Differential (Rear) – With Electronic Limited-Slip Differential (ELSD)
We recommend using Mopar® GL-5 Synthetic Axle Lubricant SAE 75W-85 with inte-
grated friction modifier.
Brake Master Cylinder We recommend using Mopar® DOT 3 Brake Fluid, SAE J1703.
TECHNICAL SPECIFICATIONS 255
9