Page 9
03-02 Removing the oil pump
To remove the oil pump, remove the
suction hose and cylinder, see 10-01.
03-02 Removing the oil pump
Pull oil pump out of oil suction pipe.
Check oil pump piston (3) for damage.
03-02 Removing the oil pump
Empty oil tank if necessary, pull suction
hose out of tank.
03-03 Assembling the oil pump
Before assembly, grease the oil pump
piston (3) and the housing well with
silicon past 980 007 100.
03-04 Air supply to and removal from
oil tank
Clean splint and hole.
1
2
2
3
03-02 Removing the oil pump
The oil pump piston is driven by the worm (1)
on the crankshaft. The pivot in the holder (2)
fixes the oil pump in the right position and
controls the lifting movement of the piston.
03 Oil pump
To Next Page
Loading...
