FORMATTING MESSAGES
77144 Issue 8 August 2009 105
When using the date option of the real time
commands, the default date is set automatically and
the format can be transformed in the same way as
the sell by date. It is important to remember that
the size format must always be entered before the
function is selected. There is no need to do this if
default text is required.
Format the date function, as follows:
(1) After entering the edit which message? menu, select the required
text height, then select the real time commands icon.
(2) Select the date functions option.
(3) If the day of week icon is selected
there are two options, letters or numbers,
which correspond to the days of the week.
The numbers run from 1-7 and letters from
A-G. In this example the number format was
used.
1 or A = Monday
2 or B = Tuesday,
3 or C = Wednesday
4 or D = Thursday
5 or E = Friday
6 or F = Saturday
7 or G = Sunday
Note: This is dependant on the first day of week setting in the clock. For the
example above Monday was day 1.
USE KEYS TO
FORMAT DOW DOY
WEEK NUMBER (W)
REAL TIME COMMANDS
SELECT DAY OF WEEK
FORMAT
> 2
B
To Next Page
Loading...
Need help?
General
