PRINTER SPECIFICATION
77144 Issue 8 August 2009 13
PRINTER SPECIFICATION
Print Head (Remote)
Control Unit
Standard Finish: Grained 304 Stainless Steel
Dimensions: (width x
height x depth):
(128 dot): 39.5mm x 71.5mm x 65mm
(256 dot): 59.5mm x 90mm x 90mm
(500 dot inclined): 79mm x 114mm x 187mm
(500 dot): 79mm x 170mm x 114
Conduit Length: (128 & 256 dot): 1.0m
(500 dot only): 1.5m
Standard Finish: Grained 304 Stainless Steel
Dimensions: (width x
length x height):
(128 dot): 113mm x 295mm x 125mm
(256 dot): 113mm x 295mm x 146mm
(500 dot): 113mm x 370mm x 160mm
Control Panel Material: Polyester Membrane Touch Panel
To Next Page
Loading...
