BASIC OPERATIONS
50 77144 Issue 8 August 2009
Note: In the case of persistent air in the ink system, it
is possible to intermittently plug the ink vent on
the bottom of the printer with a finger during the
prime procedure. Put finger over vent hole for
maximum 1 second only. Do not keep finger
over the ink vent for the duration of the prime
procedure.
C6000v Priming
(1) Ensure the print head face is back in its vertical position. Prime as with
other units, catching the ink in a suitable container or cloth.
(2) To remove spots of ink from the print face, use a swab and gently blot to
remove the ink off the print face.
To Next Page
Loading...
