PROGRAMMING THE PRINTER
77144 Issue 8 August 2009 75
ROLLOVER TIME
The default working day ends and starts at midnight. This is when the control unit
will rollover to the next working day. This value can be adjusted as follows:
(1) Scroll through the main menu bar icons using the directional arrow keys
and select the rollover icon.
(2) When the icon has been selected, the following will be displayed
The flashing cursor block on the first character can
be moved using the left and right cursor arrows.
Move the cursor over the character to be changed
and overtype with the required rollover time, e.g.
06:00 if six AM is the required rollover time. Press
enter to confirm the changes.
Press the corresponding key to select the function
PRINTING MESSAGE1
NORMAL PRINT
INK STATUS OK
Press right directional key until the menu bar starts to scroll
To Next Page
Loading...
Need help?
General
