FORMATTING MESSAGES
77144 Issue 8 August 2009 91
Select Alternative Font
It is possible to download an alternative font (via external software). This can then
be used in messages for the following:
• Sell by Alpha Months, Days and Hours
• Shift Codes
For more information on downloading an alternative font, contact Domino or
refer to the Connect User Guide.
To use the alternative font, in the edit/create new message screen, scroll to the
icon and select. The icon should now be displayed in the top right hand
corner to indicate the alternative font is now enabled. Any text entered in will
now use the alternative font.
To turn the alternative font off and return to the default font, scroll to the
icon and press. The icon will no longer be displayed. Toggle between default and
alternative fonts to design the required message.
Using the alternative font it is possible to print a message containing two languages
e.g. English and Arabic.
Va r iab l e s , this allows the insertion of variable information
into a message. These can be either prompted or external.
Prompted will prompt the user to enter information and
external will read information from an external source, i.e
bar code scanner.
Alternative Font, an alternative font can be used in
message areas such as sell by dates and shift codes. Refer to
the Connect manual for further information on
downloading an alternative font.
Data matrix Code, if a data matrix code is required in the
message, it can be entered by using this icon. The height
and width of the code is also set within this command.
QR Code, if a QR code is required in the message, it can
be entered by using this icon. All functions relating to this
code are entered using this command.
To Next Page
Loading...
Need help?
General
