BASIC OPERATIONS
48 77144 Issue 8 August 2009
(2) The printer will power up. The LCD screen will
flash twice and the screen will prompt “Please
wait” for a short while followed by
“Initialising”.
(3) After a short wait the screen shown will be
displayed. Where “Name” is seen, the
currently selected message name is displayed.
Before proceeding to the printing stage, it is
recommended that the prime function is
carried out to prime the nozzle plate with
ink, clearing any dust from the print head.
PRINTING Name
NORMAL PRINT
INK STATUS OK
To Next Page
Loading...
