FORMATTING MESSAGES
98 77144 Issue 8 August 2009
After typing the first line (“MESSAGE LINE 1”), press the down cursor to get
to the third line.
Type the next line of text (“MESSAGE LINE
3”).
The sample shows the information printed.
The next example shows the sequence needed in
the message editor to achieve the sample shown.
Again the select a font menu must be
opened and full height text chosen. The
operator will notice the text boundary cursor
change to the large (full height) square. Unless a
new text format is selected or a new line is
chosen, the full height text will remain open.
Full height text can only be entered onto the top
line.
Notice that all the text does not fit onto the message edit screen, the screen will
scroll along as the message increases beyond the LCD parameters.
It is recommended to always do a test print prior to production.
MESSAGE LINE 1
MESSAGE LINE 3
BLANK MESSAGE
Select Full Height
1.
2.
3.
4.
M
E
To Next Page
Loading...
Need help?
General
