Indoor temperature sensor
4.3-32
• Pry open the instrument panel left protective
plate (1).
• Press and hold the connector locking clip to
disconnect the indoor temperature sensor
connector (2).
• Disconnect the ventilation pipe (3).
• Remove the fixing screws (1) of the indoor
temperature sensor with a Phillips
screwdriver.
• Remove the indoor temperature sensor (2).
3- Refitting
• Refit the indoor temperature sensor (1).
• Tighten the fixing screws (2) of the indoor
temperature sensor with a Phillips
screwdriver.
To Next Page
Loading...
Need help?
General
