Operation Section
-115-
Traveling With the Load
NOTICE
Travel with the load as low as possible, while still
maintaining ground clearance.
Typical Example
1. Travel with the load uphill on upgrades and
downgrades.
Typical Example
2. For better vision, travel in reverse with bulky loads.
Unloading
Typical Example
1. Move the lift truck into the unloading position.
Typical Example
2. Tilt the mast FORWARD only when directly over the
unloading area.
WARNING
Do not tilt the mast forward with the load unless
directly over the unloading area, even if the power
is off.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
