Operation Section
-69-
Typical Example LP Engine Truck
10. Inspect the engine compartment for oil, coolant and
fuel leaks.
11. Measure the engine crankcase oil level with the dip
stick. Maintain the oil level between the MAX. and
MIN., (or FULL and ADD) notches on the dip stick.
12. Observe the engine coolant level in the coolant
recovery bottle. With the engine cold, maintain the
level to the COLD mark. If the recovery bottle is
empty, also fill the radiator at the top tank.
13. Observe the fuel level gauge after starting the truck.
Add fuel if necessary
14. In case of LPG truck, if needed, change LPG Fuel
Tank as the procedure of changing LP tanks in
Refueling Section.
WARNING
Personal injury may occur from accidents caused
by improper seat adjustment. Always adjust the
operator's seat before starting the lift truck engine.
Seat adjustment must be done at the beginning of
each shift and when operators change.
15. To position the seat, PUSH the lever away from the
seat track and move the seat forward or backward
to a comfortable position.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
