Doremi Dimension-3D - Remote Controller Functions

4.2 Remote Controller Functions
Remote Control Function
Input format selection Select HD-SDI, SDI, HDMI/DVI (through the DVI-
D/HDMI button) or Pattern.
Note: The DVI-A button is not used.
“IR Lock” button Not used
“RESET” button Not used
“Menu” button Invoke the Menu System. Pressing this button on
the IR is similar to pressing the scroll button on
the Dimension-3D front panel
“Exit” button Go back one menu level. Similar to front panel
"ESC" button
Output format area Not used
“Up Arrow” button Not used
“Down Arrow” button Not used
“Left Arrow” button Navigate left. Similar to Wheel counter clockwise
“Right Arrow” button Navigate right. Similar to Wheel clockwise
“Select” button "Ok/Select" is similar to "Select" on front panel
“InRes” buttons Not used
“InFPS” buttons Output frame rate match input frame rate
“Scaling” button Not used
“De-Int Filter” button Not used
“Status OSD” button Toggle on screen display "ON" and "OFF"
“Save” button Save settings
DM3.OM.001026.DRM Page 28 Version 1.4
Doremi Labs Inc.