EasyManua.ls Logo

Doremi Dimension-3D - Page 5

Doremi Dimension-3D
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
THIS DEVICE MUST BE GROUNDED.
IMPORTANT
Power requirements for electrical equipment vary from area to area. Please ensure that the
Dimension-3D meets the power requirements in the surrounding area. If in doubt, consult a
qualified electrician or a Doremi Labs dealer.
AVIS
Le voltage peut différer d’un pays a l’autre. Il faut que le Dimension-3D soit ajusté au voltage du
pays.
LA SOURCE DE PUISSANCE DOIT AVOIR UN CONDUCTEUR CONNECTE A LA TERRE.
Toutes réparations doivent être effectuées par une personne qualifiée. AFIN D’EVITER UN CHOC
ELECTRIQUE, VEUILLEZ NE PAS ENLEVER LE CAPOT.
Dimension-3D Power Ratings
AC Input: 100-240V~, 0.12A, 50-60Hz
Maximum Power Consumption: 15W
Dimension-3D Rack Mount and Thermal Information
Maximum operating ambient temperature is 30°C.
Never restrict the air flow through the devices’ fan or vents.
When installing equipment into a rack, distribute the units evenly. Otherwise hazardous
conditions may be created by an uneven weight distribution.
Connect the unit only to a properly rated supply circuit. Reliable earthing (grounding) of
rack-mounted equipment should be maintained.
Protecting Yourself and the Dimension-3D
Never touch the AC plug with wet hands. Always disconnect the Dimension-3D from the power
supply by pulling on the plug not the cord. Allow only a Doremi Labs, Inc. dealer or qualified
professional engineer to repair or reassemble the Dimension-3D. Apart from voiding the warranty,
unauthorized engineers might touch live internal parts and receive a serious electric shock. Do not
put, or allow anyone to put any object, especially metal objects, into the Dimension-3D.
If water or any other liquid is spilled into or onto the Dimension-3D, disconnect the power and call a
Doremi dealer. The unit must be well ventilated and away from direct sunlight. To avoid damage to
internal circuitry, as well as the external finish, keep the Dimension-3D away from direct sources of
heat (heater vents, stoves, radiators). Avoid using flammable aerosols near the Dimension-3D.
DM3.OM.001026.DRM Page 5 Version 1.4
Doremi Labs Inc.