Dorma PORTEO - Adjustments and Settings; Adjusting the PowerLess Mode; Adjusting Door Speed

DORMA PORTEO
WN 057472 45532 02/08
Adjustments
S
p
e
e
d
+
PowerLess
Position
21
S
p
e
e
d
H
o
l
d
-
o
p
e
n
t
i
m
e
PowerLess
Position
W
a
l
l
b
l
a
n
k
i
n
g
++
+
+
+
D
e
l
a
y
e
d
o
p
e
n
i
n
g
34
S
e
r
v
i
c
e
p
u
s
h
b
u
t
t
o
n
++
+
1
2
3
4
= PowerLess
= Speed
= Hold-open time
= Wall blanking
= Delayed opening for
locking mechanism
= Service pushbutton
= Light emitting diode
(LED, green)
= DIP switch
S
p
e
e
d
PowerLess
Position
+
+
Adjustable settings
potentiometers 1 4
- Function "PowerLess" - Speed
- Delayed opening for locking mechanism - Wall blanking
- Hold-open time
Adjust the mode of operation "PowerLess"
"ON"
"I" PowerMotion
potentiometer 1 "PowerLess"
"PowerLess"
Adjust the speed
"ON"
potentiometer 1
"PowerLess" lowest possible speed
"PowerLess"
The following settings can be adjusted with the aid of the (controllers) to :
Set power switch in position .
Set program switch in position ( ).
Turn (speed) to the left as far as possible to position
When in mode, the door can be opened manually and almost
effortlessly. The door closes automatically on expiry of the adjusted hold-open time.
Set power switch in position .
Adjust the desired opening and closing time (speed) via .
The original setting for the driving path from 0° to 90° amounts to 10 seconds.
The original setting for the driving path from 90° to 0° amounts to 10 seconds.
The speed is adjustable from 5 sec. to 10 sec. and is for the driving path for an
opening angle from 0° to 90°.
- = lowest possible speed (driving time = 10 sec.)
+ = highest possible speed (driving time = 5 sec.)
Do not confuse the position with the
(direct in front of ).
.
10 sec.
1 23 4
OFF
ON
A BCD
ON
1 23 4
A BCD
OFF
Use the enclosed tool (potentiometer tool) to adjust the potentiometers.
GB 22